MLLED10W-22R-F

  • warning: array_map() [function.array-map]: Argument #2 should be an array in /home/railtech/www/modules/system/system.module on line 1015.
  • warning: array_keys() [function.array-keys]: The first argument should be an array in /home/railtech/www/includes/theme.inc on line 1817.
  • warning: Invalid argument supplied for foreach() in /home/railtech/www/includes/theme.inc on line 1817.

Description

LED Light Bar contains twenty-two 10-watt high powered LEDs providing 220 watts of LED light power, producing 19800 lumens of LED light and drawing only 18.6 amps on 12 volts. This LED emitter light runs on any voltage ranging from 9 Volts to 32 Volts.
This LED light emitter bar light runs on any voltage ranging from 9 Volts to 32 Volts DC. This means that you can power this and visible LED emitter light from any vehicle, equipment, ATV or boat electrical system. You do not need anything special to operate these multi¬voltage units, as an internal voltage regulator controls the power to the LEDs.
There is a one foot pigtail attached to the LED light terminated in a 2 pin Deutsch plug. A wiring harness attaches to the Deutsch socket
on the back of the LED light. The harness is terminated in a 2 pin Deutsch plug and includes 20 feet of cable, a relay and a toggle switch that will operate on 12 or 24 volts. The wiring harness is not necessary to installation. Operators can use existing wiring and switches, assuming they are rated for the amperage listed below.
A hinge style mounting bracket enables the operator to affix one portion of the hinge bracket to the mounting surface. Then, the operator can set the angle and attach the upper portion of the hinge style mount to the light. The operator can then adjust the hinge bolt, once the desired angle is set.

Optics Angle: 10 degrees (create a narrower, longer, distance oriented beam) Flood Beam Optics Angle: 35 degrees (creates a shorter, wider, diffused beam) Click here to see more information on the spot (narrow) and flood (wide) lens used in this LED light.

Specifications

  • Length: 40 inches
  • Height: 2.75 inches
  • Depth: 2.5 inches
  • Weight: 9 pounds
  • Number of LEDs: 22
  • Individual LED Watts: 10 watts each LED
  • LED Maximum Lumen Output: 900 lumen per LED
  • LED Mean Lumen Output: 700 lumen per LED
  • LED Type: Seoul P7
  • Total LED Watts: 220
  • Volts: Accepts input voltage 9-32 Volts DC
  • Amps: 18.4 (on 12 volts) 9.2 amps (on 24 volts)
  • Lumens: 19,800 total
  • LED Light Color: 6300k visible
  • CRI: 70
  • Wavelength Spectrum Produced (Standard Eye Response): 370NM - 790NM
  •  Housing Color: black or white available. Specialty colors available on request. Powder coat finish.
  • Housing material: Aluminum
  • Ambient Operating Temperature Range: -45 degrees C to 85 degrees C
  • Storage Temperature Range: -45 degrees C to 100 degrees C
  • Ingress Protection Rating: IP67 (water tight and dust tight)
  • Mounting Type: Hinge mounting for 270 degrees of possible position angles.
  • Warranty 3 years

Models

  • MLLED10W-22R-F ( Housing Black )
  • MLLED10W-22R-F ( Housing White )